PIKE 3108 create RAID under UEFI BIOS

Question
How to create RAID on ASUS PIKE 3108?

Solution

Step1. Boot to BIOS and move Advanced Page then select “AVAGO MegaRAID PIKE 3108”.

Step2. Select “Main Menu”.

Step3. Select “Configuration Management”.

Step4. Select “Create Virtual Drive”.

Step5. Select “RAID Level then select Drives”.

Step6. Select “Check All then Apply Changes”.

Step7. Select “OK”.

Step8. Select “Save Configuration”.

Step9. Select “Confirm to Enable”.

Step10. Select “Yes”.

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.