[Motherboard] When assembling the CPU cooler, be sure to tighten the screws completely to avoid system instability.

To prevent abnormal CPU heating due to incorrect assembly of the CPU radiator, which can lead to system instability or crashes, ensure the following steps are observed during assembly:

1. Applying thermal paste:
a. Ensure even application of thermal paste.
b. Follow the application instructions in the CPU cooler's user manual.

2. Installing the CPU cooler:
a. Consult the CPU cooler's manual for proper installation guidance.
b. Once installed, verify that the radiator is not tilted and the thermal paste has not spilled over. If either issue is present, reinstall the CPU radiator.

For the installation of the CPU radiator, refer to the motherboard's user manual. This manual will detail the complete installation process for the radiator. For instance, for the ProArt Z790-CREATOR WIFI motherboard, the installation can be found on pages 2-3 of the user manual.
 

T20704_ProArt_Z790-CREATOR_WIFI_WEB.pdf (asus.com)

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.