Thunderbolt 1/2 device can't be detected after updated Thunderbolt4 FW to NVM36.

Update : 2023/04/06 15:56

Thunderbolt 1/2 device can't be detected after updated Thunderbolt4 FW to NVM36.

After updated the FW of ThunderboltEX 4 card to NVM 36, or after updated BIOS newer than 2201 of Z690 series MB which has onboard thunderbolt 4, Thunderbolt 1/2 devices cannot be detected anymore.

After Intel update thunderbolt FW version to NVM 36, it no longer support thunderbolt1/2, and can only support Thunderbolt 3/4 devices now.

The onboard thunderbolt FW of MB is built-in BIOS. If you still want to use Thunderbolt 1/2 devices, please help do not update the new FW of ThunderboltEX 4 card and BIOS which newer than 2201.

 

Related Models:

Card: 

ThunderboltEX 4 card

MB :

ROG MAXIMUS Z690 EXTREME GLACIAL
ROG MAXIMUS Z690 EXTREME
ROG MAXIMUS Z690 FORMULA
ROG MAXIMUS Z690 HERO
ROG STRIX Z690-I GAMING WIFI
ProArt Z690-CREATOR WIFI

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.