[Motherboard] Two-Way AI Noise Cancelation - Introduction

About Two-Way AI Noise Cancelation

Our latest audio utility leverages a massive deep-learning database to reduce background noise from the microphone* and incoming audio. Distracting keyboard clatter, mouse clicks and other ambient noises are smartly pared back so you can hear and be heard with crystal clarity while gaming or in calls.

Multiple port connection supported:

It supports all types of audio device connected, e.g, 3.5mm audio jack, USB, or Bluetooth.

How to support Two-Way AI Noise-Cancelation?

You can check the product specifications on the ASUS official website.

(Ex: ROG MAXIMUX XIII EXTREME)

Two-Way AI Noise Cancelation: Setup Guide

1.  Support List

2. Setup Guide

3.  Test Two-Way AI Noise Cancelation

1.  Support Model List

2._Setup Guide

Step 1. Open and Enter Armoury Crate

Step 2. Click “Device” and choose your motherboard.

Step 3. Click “Audio”

Step 4. Turn on Microphone input /Audio output after plugging in the audio device and select the device to which you want to apply Microphone input /Audio output

Step 5. Adjust the Microphone input /Audio output level, depending on the environment you are in.

* For the suggested Noise Type, please refer to the table below.

Step 6. Continue to set up for the communication or Live streaming apps.

Note:

1.        Click “Reset” when you re-plug and change audio device, or when your device is not detected.

2.        Click “OK” to continue

2._TEST Two-Way AI Noise Cancelation

To test whether unwanted background noise from your microphone or incoming audio is removed with this function turned on, we recommend to confirm by the following steps:

·            Audio output test

1.     Enable Audio Output and select your output speaker device (Ex:3.5mm->Realtek USB Audio)

2.     Open communication software (Ex:Teams,Discord,Zoom,etc.), and select output device “AI Noise-Canceling Speaker (ASUS Utility)

3.     Have one person play the background noise and speaking at the same time; while another person testing if the voice received is clear and without any environmental sound in a different spacing without any interference with the first person.

·            Microphone Input

1.     Open the audio recording app when the Microphone Input is disabled. Take Window’s Voice Recorder as example, and record your voice with your microphone. Click on the ”Record” icon to start the recording.

2.     Setup Two-Way AI Noise Cancelation in Armoury Crate (Please refer to the Instruction above).

3.     Setup Two-Way AI Noise Canceling Microphone(ASUS Utility) in the Sound Settings of Windows.(Please refer to Instruction below)

Step 1. Click “Open Sound Settings”

Step 2. Select “AI Noise Canceling (ASUS Utility) in Input

4. Open the audio recording app again and record your voice with your microphone. You can compare the difference to check whether Audio Output is enabled.

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.