[Windows 11/10] How to convert the USB flash drive format to FAT32

Applicable Products: Notebook, Desktop, All-in-One PC, Gaming Handheld, MiniPC, ASUS NUC

In some cases, you may need to convert the USB drive format to FAT32 so that the device can access the specific file (such as update BIOS with ASUS Firmware Update/EZ Flash in the BIOS Utility), please refer to the following steps to convert USB format via the Windows format feature.

Note: All files on the USB flash drive will be deleted during the convert process with format feature, so please back up your files first if you have data inside originally.

Note: If your USB drive has a large capacity and cannot be formatted to FAT32, you can try creating a partition (typically smaller than 32GB) to proceed with the formatting. Learn more about Hard disk Partition, Shrink, and Extend.

Please go to the corresponding instruction based on the current Windows operating system on your device:

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.