ASMB9 BMC webUI unable to open in local, when MotherBoard connects a single LAN on shared LAN

Update : 2021/12/30 12:33

ASMB9 BMC webUI unable to open in local, when MotherBoard connects a single LAN on shared LAN

Due to security reason, Intel disabled OS2BMC. Hence, with only 1 LAN cable connected, shared LAN is unable to ping LAN 1.

Further causes BMC webUI unable to show locally. Please connect another RJ45 cable to shared LAN 2 if you want to access BMC in local network.

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.