OS cannot be installed by a USB ODD connecting to USB3.0 port on motherboard

Q: I’ve found that I cannot install OS by a USB ODD connecting to USB3.0 port on motherboard. How can I solve this problem?

A: Connect USB ODD to an origin USB3.0 port of chipset. Load driver from below path after entering driver loading step.

Path: Chipset\Win7_8_8.1\Win7_8_8.1\Packages\Drivers\SBDrv\Bolton\USB30

Step one: Load XHCI driver from USB3.0 (Shown in Pic1, Pic2)

Pic1

Pic2

Step two: After loading XHCI driver, a window shows ‘no new device can be found’ will popup (Shown in Pic3)

Pic3

Click OK and continue loading HUB driver of USB3.0 after click ‘OK’ (Shown in Pic4, Pic5)

Pic4

Pic5

Step three: After loading XHCI driver and HUB driver, WIN7 can be installed smoothly. (Shown in Pic6)

Pic6

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.